Rochester Quadrajet electric choke [RCT1211]

Rochester Quadrajet electric choke [RCT1211] 

USA made assembly with "Flat" shaped terminal. The flat terminal allows use of standard spade type electrical connection. Electric Choke Thermostat fits Rochester Quadrajet, Twojet and Dualjet carburetors.  Can also be used on many 4G/Four-jet carburetors.

When 12v power is supplied to the choke and the element heats up, the bi-metal coil tightens up. When the coil cools down, the coil un-winds.

Includes retainers and 3 screws.

Hot-Air Choke to Electric Choke Conversion:
This electric choke thermostat can be used to replace original hot-air thermostat, just run a 12 volt wire to a "keyed" power source and remove original hot-air choke thermostat gasket. A "keyed power source only receives power when the ignition key is turned on.

Thermostat diameter: 2-1/4"

Fits:

Holden Commodore VC, VH, VK, VL 1980-1988 V8 253, 308

Holden WB 1980-1985 V8 253, 308

**This electric choke unit will not fit early Holden Rochesters with a divorce choke setup**

**This choke suits Australian Rochesters with a flat-blade electrical connection.  for US-style "L-Shaped" connections, see part No RCT1211A**